We can export items by EMS. Feel free to order.
Languages:  English  Japanese  

LIPO Battery Charger LBC-010


- This charger is intended for the Li-Po battery.
- Uses the SMPS for power when charging, thus it must be accompanied with the SMPS 12V 5A.*
SMPS 12V 5A products are available as substitutes because they are difficult to obtain from manufacturers.
Please purchase from the link below.
AC adapter-12V5A

- Support 2S and 3S Cell charge. (Exception, does not charge simultaneously)

Charger : LIPO Battery Charger LBC-010 x1
* Battery and SMPS 12V 5A sold separately.

Input Voltage : 10~18V
Output Voltage
- 2S Cell : 8.4V
- 3S Cell : 12.6V
Output Current : 1.1A
- RED LED : Charging
- GREEN LED : Charge Complete
- BLINKING RED LED : Bad Battery Connection

- Do not apply heat, water or any other liquid on the battery.
- Do not take the battery apart.
- Do not use damaged batteries. (inflated, deformed, damaged, etc.)
- Do not charge 2S and 3S Cell together at once.
- When charging, make sure the battery is connected into the correct polarity.
- Do not charge when the battery is hot. Please charge after it has cooled off.
- Do not charge the battery when it is being used by the controller.
- When the battery is not being used or fully charged, please do not have it connected to a device. (to avoid discharge or damage)

- LIPO Battery 11.1V 1000mAh LB-010
- LIPO Battery 11.1V 1000mAh LB-011
- LIPO Battery 11.1V 1800mAh LB-012
- LiPo Battery 3cells 1000mAh 20-30C

Add to Cart:

  • Model: 903-0144-000
  • Shipping Weight: 0.05lbs
  • Manufactured by: ROBOTIS

This product was added to our catalog on Tuesday 05 February, 2013.